-13%

Proel DB1A Active Direct Box

DB1A

Single channel active D.I. Box with isolation transformer

D.I. Boxes (Direct Injection Boxes) are part of the essential set of tools required for any professional live sound situation or any application where the audio devices feature diff erent levels, impedance and connections. Transforming audio signals from unbalanced to balanced, D.I. Boxes reduce the possibility of electrical disturbances on the line – especially over long cable runs such as from a musical instrument to the FoH mixing console. The DB series includes three diff erent models of high-performance D.I. boxes: a single channel active (DB1A), a single channel passive (DB1P) and a dual channel active (DB2A). The circuitry of each model has been designed with the maximum care, using carefully selected electronic components, such as isolation transformers (DB1A, DB1P) and low-distortion ICs. This guarantees a clean, hum-free signal transmission from the instrument to the mixing consoles, even on very long cables, without impedance matching problems. On the front panels, a wide choice of connectors is available (XLR, JACK and RCA, depending on the model), allowing easy connection from a wide range of sources, including keyboards and samplers, guitars and basses, PC audio cards and any type of music player. The ACTIVE versions can be powered by 48 V phantom power from the mixing console, by a 9 V battery or, in large applications using many DI BOXES, by an external 9 V power adapter that can be daisy-chained using the double power connector on the rear panel. The innovative mechanical design of the three models includes an aluminum shell and rubber corners, which provide maximum protection in the toughest situations. When the two rubber corners are removed, two guides are exposed, allowing the coupling of two DI units, which can then be mounted in a 19” standard rack (rack ears included). This unique feature is extremely convenient for engineers who need to use a large number of DI BOXES in the same application.

$173,09 $197,81

Technical Specifications

Input Section
Input Impedance1M Ohm (pad at 0 dB)
47k Ohm (pad at -20 dB)
44k Ohm (pad at -30 dB)
Max Input Level +5 dBu (pad at 0 dB)
 +25 dBu (pad at -20 dB)
 +35 dBu (pad at -30 dB)
Connectors2 x 1/4″ jack + 1 x XLR-F (unbalanced)
Output Section
OutputTransformer Balanced (fully isolated)
Max. Output Levelinto 600 Ohms or greater
+3 dBu (for 0.1% THD at 50 Hz)
+5 dBu (for 0.1% THD at 1k Hz)
ConnectorXLR-M
System Performance 
Insertion loss< 1 dB
CMR> 60 dB
Phase distortion+11° at 20 Hz, -6° at 20k Hz
Distortion (THD 20-20k Hz 0dBu)< 0.007 %
Noise< -105 dBu unweighted
Frequency Response10 Hz to 100 kHz, +0dB/-1 dB
General 
ControlsOn/off, Pad -10, Pad -20, Gnd Lift, Ø inv.
IndicatorsOn, signal, clip
Phantom Power+24 volts DC to +48 volts DC
AC/DC adaptor+12 volts DC
Standalone/Standby9 volt PP3 type battery
Current consumptionless than 3 mA
Dimensions (WxHxD)215 x 50 x 125 mm
Weight1.08 kg (2.38 lb)
Kategoriler:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Proel DB1A Active Direct Box”

There are no reviews yet.

İlgili ürünler

Para biriminizi seçin!
₺ Türk lirası
$ Amerika Birleşik Devletleri (ABD) doları